Planning for repairs to have a perfect waterproofed home? Get the right diagnosis and expert solutions
The best thing you can do to extend the life of your building is to waterproof it. This is the process of detecting and eliminating dampness. As the most effective weather protection solution, waterproofing is a must. Luckily, there are some dampness problems that don’t require waterproofing. Once you repair your roof, gutter, downpipe or plumbing, many small moisture problems will be over. The small issues that don’t have to be waterproofed should never be ignored, as they can worsen and become a big mess. If you think you have dampness in any area of your house, get an expert to detect and diagnose the problem.
Common defects and top solutions
As aforementioned, you need the most reliable and effective waterproofing services to detect and solve dampness issues. Once leaks have been detected, you should plan for home repair and maintenance without delay. Generally, major defects that demand quick waterproofing to save the entire building include the following.
Overhead Water Tank- Water tanks are meant to store safely without any signs of leakage. At times, seepage and leakage from overhead and underground tanks spoils the décor, thus helps in the growth of the harmful bacteria such as Algae, Fungus, Etc which leads to the various diseases. Therefore, it is important to waterproof your overhead water tank to stay away from these diseases.
External wall damp – This sort of damp is caused by:
- Poor brickwork and poor painting,
- Obstructed cavities in the cavity walls,
- Absence of water sill drips,
- missing cavity wall weeps,
- pipes or wires entering the building
To solve such a problem, buy the best waterproofing coating, water repellant product, masonry paint or a primer product. Your waterproofing specialist will tell you exactly what products you need to purchase.
Damp cellar or basement – This is so common in buildings of all sizes and you can eliminate it by first detecting the hidden water leaks. These could arise from old mains water supply pipes, adjacent basement sections that have water ingress issues or water table problems like wells. To waterproof your damp basement or cellar, you should apply waterproofing coating to floors and walls, lay an air gap membrane on the floor, create a floor-to-wall joint seal or fit a sump and pump system.
Damp internal plaster – This will mostly occur above the damp proof course due to chimney leaks, penetrating dampness, hidden water leaks, bridged damp proof course and so on. This problem can be eliminated using the most effective waterproofing products and techniques.
Where to seek help
If your contractor has found damp areas in the Water tank, basement, external wall, internal plaster or solid floor, get in touch with Resikon. This company is the best waterproofing solution providers in the whole of India and has the right product for every problem.
